Complete component and consumable supply for RO, UF and softening plants: FRP and stainless tanks, salt and dosing tanks, control valves, pressure gauges, flowmeters, conductivity meters, RO controllers, metering pumps and bulk media including resin, carbon, quartz sand and softener salt.
Beyond membranes, a water treatment plant runs on tanks, valves, instruments, dosing pumps and filter media — and it stops running when any one of them fails or runs out. HydropureWater supplies the complete consumable and component list for RO, UF and softening plants: FRP and stainless steel tanks, salt and chemical dosing tanks, multi-port control valves, pressure gauges and flowmeters, conductivity meters and RO program controllers, metering and circulation pumps, and bulk filter media including resin, activated carbon, quartz sand and softener salt.
| Category | Types & Specifications | Function |
|---|---|---|
| FRP tanks | Full diameter and height range, multiple pressure ratings | Media filtration and softening resin vessels |
| Stainless steel tanks | Vertical pressure vessels and large-volume storage tanks | Filtration, buffer and pure water storage |
| Salt boxes | Cylindrical and cabinet formats, multiple volumes | Brine storage for softener regeneration |
| Chemical dosing tanks | Cylindrical and rectangular, graduated, multiple volumes | Antiscalant, acid, alkali and disinfectant dosing |
| Control valves | Manual lever, digital timer and volumetric control heads | Filtration and softening service, backwash and regeneration cycles |
| Pressure gauges | Panel mount, bottom entry, flange mount; 0–1.6 MPa typical range | Filter differential pressure and system pressure monitoring |
| Flowmeters | Panel rotameters, inline flow tubes, liquid turbine flowmeters | Permeate, concentrate and feed flow measurement |
| Conductivity meters | CM-230s and equivalent online conductivity monitors with probe | Permeate quality monitoring and alarm |
| RO program controllers | ROS-2015 relay controller; ROS-360 touchscreen controller | Automated RO sequence, flush and alarm control |
| Metering pumps | Solenoid, diaphragm and digital dosing pumps | Antiscalant and chemical dosing |
| Water pumps | Horizontal and vertical multi-stage centrifugal pumps | Feed, high-pressure, backwash and transfer duty |
| Filter media | Ion exchange resin 25 L/pack; activated carbon 25 kg/pack; quartz sand 50 kg/pack; soft water salt 10 kg/pack | Media charges and softener regenerant |
Most plant downtime traces back to a low-value item — a dosing pump that stopped, a control valve that stuck mid-cycle, a conductivity probe reading wrong — and the cost is never the part, it is the production stopped while it is sourced. Because we build complete systems on these same components, we can supply the correct replacement against your existing model number and tell you which items are worth holding as site spares for your particular configuration. We also supply the bulk media on a recurring basis, so resin, carbon, sand and salt arrive on schedule rather than being remembered after the plant has already gone out of specification.
Quartz sand and activated carbon are replaced periodically depending on loading — carbon exhausts as it adsorbs chlorine and organics, and sand degrades as grains attrite. Ion exchange resin lasts considerably longer but eventually loses exchange capacity. Falling performance despite correct backwashing is the practical indicator for all three.
It automates the reverse osmosis sequence — startup flush, service run, shutdown flush, tank level control and alarms on low inlet pressure or high permeate conductivity. The ROS-2015 is a relay-based controller for straightforward duty; the ROS-360 adds a touchscreen interface for systems where operators need visibility of running conditions.
It is the single most useful instrument on the plant. Permeate conductivity is the direct measure of whether the membranes are still doing their job, and a rising trend gives weeks of warning before the water goes out of specification. Without it, membrane deterioration is usually discovered by a downstream process failing.
It is matched to the softener model, since brine volume must suit the resin charge being regenerated — the KJ-WT range pairs each capacity with a specific brine tank from 60 to 2,000 L. If you are replacing a salt box, give us the softener model number rather than measuring the old tank.
Reverse osmosis and ultrafiltration membrane elements, filter cartridges in 10-40 inch lengths, precision and bag filter housings, plus stainless steel and FRP membrane pressure vessels. Compatible with plants from any original supplier.
WSZ series underground integrated sewage treatment plant combines anoxic/aerobic (A/O) biological contact oxidation with sedimentation and disinfection in a single buried package unit. Fully automated with no operator required, it handles 1–80 m³/h for residential communities, hotels, hospitals, factories, and rural areas. Can be installed below grade with landscaping above, or mounted on a trailer for mobile deployment.
ZSQ series dissolved air flotation (DAF) system for high-efficiency removal of suspended solids, FOG, oil & grease, and colloidal matter from industrial wastewater. Micro-bubble technology with automatic skimming handles 4–300 m³/h across 13 standard models. Proven in food processing, pulp & paper, textile, metalworking, petrochemical, and municipal pre-treatment applications.
JY series all-in-one water purification system integrates coagulation, flocculation, sedimentation, filtration, and automatic backwash in a single compact unit. Fully automatic operation treats surface water with turbidity up to 3,000 mg/L to below 3 mg/L. Ideal for rural water supply, small towns, industrial process water, and mine water treatment with capacities from 10 to 200 m³/h.
Get a free consultation and customized quote from our engineering team.
