Wastewater treatment expert: +86-181-0655-2851 Get Expert Consultation

~200 m³/d packaged sewage treatment for office campus irrigation

Proposed treatment for office campus sewage intended for irrigation reuse, subject to source characterisation, flow verification and applicable reuse requirements.

Project Background

The client-supplied design basis is ~200 m³/d for office campus sewage intended for irrigation reuse. Catering and other mixed drains must be verified, together with flow basis, wastewater quality, irrigation exposure and reuse limits. The proposed package treatment train includes pretreatment, biological treatment, clarification, filtration, disinfection, storage and residual management, with final scope subject to client data.

Our Solution

The proposed solution is a buried package treatment plant sized initially against the client-supplied design basis of ~200 m³/d, subject to hydraulic and load verification. A rotary screen removes gross solids, equalisation balances wastewater quality and flow, and anaerobic followed by aerobic biological stages reduce biodegradable organics and nitrogen. Clarification separates biomass, multimedia filtration polishes suspended solids, and ultraviolet disinfection reduces viable organisms before irrigation storage. Settled sludge should be thickened and dewatered, with the clarified filtrate returned to the headworks and conditioned sludge managed under the applicable local requirements. Catering inflows, peak loads, groundwater conditions, reuse exposure and standards may change the pretreatment, process selection, disinfection, storage and residual-management arrangements.

What We Asked First

Please confirm the location, whether burial is required, design flow basis, discharge periods, maximum hourly flow, available equalisation storage, wastewater sources, recent quality data, irrigation method, public-contact exposure, reuse limits, residual-water destination and required supply scope.

Proposed Process Train

  1. 1Rotary mechanical bar screen
  2. 2equalisation and flow balancing
  3. 3anaerobic reactor
  4. 4aerobic biological treatment
  5. 5secondary clarification
  6. 6multimedia filtration
  7. 7ultraviolet disinfection
  8. 8irrigation storage
  9. 9controlled residual management

For Similar Projects

Prepare flow records, wastewater sampling results, source and drainage plans, irrigation details, reuse and discharge requirements, site constraints and a clear equipment, installation, commissioning and training scope.

Ref. A-034. Client identity is withheld under our client-confidentiality policy. Capacity is shown as a capacity class (design value rounded up to the next 5 at its second significant digit).

How We Deliver

Projects of this type are delivered in the nine stages below. Installation, commissioning and other on-site stages follow each contract's scope. Every stage within our scope produces a written record that we keep on file.

  1. 1 Design basis confirmationAverage and peak flow, influent or gas data, discharge or reuse target Record producedDesign basis sheet
  2. 2 Process & mechanical designProcess calculations, equipment selection, layout and piping Record producedCalculation book, P&ID, general arrangement
  3. 3 Manufacturing & quality controlMaterial and in-process inspection of the main equipment Record producedMaterial & QC records
  4. 4 Factory acceptance test (FAT)Trial run against the design parameters before dispatch Record producedFAT record
  5. 5 Packing & dispatchPacked, marked and shipped against the equipment list Record producedPacking list
  6. 6 Installation or supervisionPer contract scope Record producedInstallation record
  7. 7 CommissioningStart-up, parameter tuning and interlocks Record producedCommissioning log
  8. 8 Performance verificationEffluent or emission checked against the design basis Record producedPerformance test record
  9. 9 Training, handover & after-salesOperator training, document handover, after-sales support Record producedO&M manual, training record

Planning a similar project? Start with these six parameters

  1. FlowDaily average and peak (m³/day and m³/h)
  2. Influent qualityCOD, BOD₅, TSS, pH and anything unusual
  3. Discharge targetThe standard you must meet, or the reuse purpose
  4. Operating hoursContinuous or batch; seasonal changes
  5. Site & civil scopeFootprint, power supply, who builds the tanks
  6. Project stageBudgeting, tender, or ready to order

Send your parameters — initial process recommendation within 24 hours

Frequently Asked Questions

This project is listed in the ~200 m³/d capacity class: the design value rounded up to the next 5 at its second significant digit. Exact design values are not published.
The process train under assessment is: Rotary mechanical bar screen → equalisation and flow balancing → anaerobic reactor → aerobic biological treatment → secondary clarification → multimedia filtration → ultraviolet disinfection → irrigation storage → controlled residual management.
Yes. Send us your daily and peak flow, influent quality, discharge or reuse target, operating hours and site constraints, and our engineers will reply with an initial process recommendation within 24 hours.

Planning a similar project?

Share your flow, influent quality and discharge target — our engineers respond within 24 hours.

AI Growth
Contact
Contact Us
Call Us
+86-181-0655-2851
Email Us Get a Quote Contact Us