Proposed modular wastewater treatment package for phased expansion, subject to wastewater characterisation and applicable discharge requirements.
Project Background
The client requires a modular treatment system that can be expanded from an initial ~200 m³/d design basis to twice that capacity within two to three years. The wastewater source, average and peak flow bases, operating hours, influent characteristics, discharge destination and applicable permit limits remain to be confirmed before final process and equipment selection.
Our Solution
The proposed solution is a modular MBR wastewater treatment package comprising inlet screening, flow equalisation, biological treatment with flat-sheet membrane separation, disinfection, flow-paced transfer, and a dedicated sludge-handling train. Screening protects downstream equipment, equalisation smooths variable loads, biological treatment and membrane separation provide a compact treatment stage, and disinfection addresses the final microbiological control requirement. Thickening and plate-and-frame dewatering reduce sludge volume before controlled storage and disposal. The configuration should preserve common treatment modules, utilities and controls so additional capacity can be added without redesigning the complete plant. Final pretreatment, membrane area, disinfection method, residuals handling and module arrangement will be adjusted after wastewater data, operating criteria and the applicable discharge standard are confirmed.
What We Asked First
Please confirm the wastewater source, flow basis, peak factors, operating hours, influent analysis or engineer-approved design values, discharge destination and permit limits, installation conditions, electrical supply, project scope, delivery location and commissioning programme.
Proposed Process Train
- 1Influent characterisation and flow monitoring
- 2inlet screening and grease or solids removal where required
- 3equalisation and flow control
- 4biological MBR treatment with flat-sheet membrane separation
- 5disinfection and flow-paced transfer
- 6sludge thickening and dewatering
- 7dewatered sludge storage and controlled disposal
For Similar Projects
Prepare a wastewater source and process profile, flow data, influent analyses, discharge criteria, site utilities and delivery schedule before selecting the final configuration and expansion boundaries.
Ref. A-033. Client identity is withheld under our client-confidentiality policy. Capacity is shown as a capacity class (design value rounded up to the next 5 at its second significant digit).
