On 17 November 2026, TechRound identified NuRain, formerly known as Al-Miyah Solutions, as a Saudi Arabian climate-tech startup developing decentralised wastewater treatment for locations without central sewer connections. The company’s full-scale mobile and modular unit can treat 150 m³ per day and is reported to reduce energy demand by around 50% against conventional treatment processes. TechRound
Key Takeaways
- NuRain’s mobile, modular treatment unit was installed at the National Water Company’s wastewater treatment plant in Rabigh in 2023. TechRound
- KAUST reported that the full-scale system can treat 150 m³ of wastewater per day and produce enough treated water for around 1,000 to 2,000 people. TechRound
- The technology combines aerobic granular sludge with gravity-driven membrane filtration and is intended for non-drinking uses including irrigation, horticulture and industry. TechRound
- The developers said the system could reduce energy demand by around 50% compared with conventional treatment processes. TechRound
- Gulf water scarcity is creating demand for technologies that can expand potable-water and treatment capacity, while the region accounts for nearly 40% of global desalination capacity. Carnegie Endowment for International Peace
NuRain’s Rabigh Deployment
Wastewater treatment can be difficult in areas that are not connected to central sewage networks, with some locations having to transport wastewater by truck to treatment facilities, adding cost and creating further environmental pressures. TechRound
NuRain, a spinout from King Abdullah University of Science and Technology, developed its mobile, modular treatment unit for those operating outside central sewer coverage. The unit was installed at the National Water Company’s wastewater treatment plant in Rabigh in 2023. TechRound
The treatment process uses aerobic granular sludge, which groups microorganisms into dense granules, alongside gravity-driven membrane filtration. According to TechRound, this configuration treats wastewater and produces water for non-drinking uses such as irrigation, horticulture and industry. TechRound
KAUST reported that the full-scale unit treats 150 m³ of wastewater per day, producing enough treated water to serve around 1,000 to 2,000 people. The technology’s developers also said it could reduce energy demand by around 50% compared with conventional treatment processes. TechRound
Why Decentralised Treatment Matters in the Gulf
The wider operating context is a region where water scarcity and aridity complicate both water supply and the infrastructure needed to collect wastewater. The Gulf accounts for nearly 40% of global desalination capacity, while natural limitations associated with arid and semi-arid climates remain a major challenge for the region’s energy transition. Carnegie Endowment for International Peace
That context makes the Rabigh installation relevant beyond a single plant: the reported system addresses locations where wastewater transport by truck can add cost and environmental pressure. TechRound It also illustrates the type of treatment adaptation that may support Saudi Arabia’s target of reusing 70% of treated wastewater by 2030, alongside its target of planting 400 million trees by the same year. TechRound
Specification Read
The reported scale is 150 m³/day, equivalent to 0.15 MLD. Applying the reported population-equivalent range of 1,000 to 2,000 people gives a stated contribution of 0.075 to 0.15 m³/day per person, but the source did not report design flow variability, operating availability or a maximum turndown ratio. TechRound
NuRain’s reported train is aerobic granular sludge followed by gravity-driven membrane filtration. It therefore bears on the biological-treatment and membrane-separation stages of a decentralised wastewater plant. A conventional plant enquiry would also need to establish where screening, primary clarification and any required tertiary or disinfection steps sit relative to this train; the source did not specify those upstream or downstream stages. TechRound The reported energy demand is around 50% below conventional treatment processes, but no operating-cost or power-consumption figure was supplied. TechRound
Operators evaluating municipal wastewater treatment can compare the reported biological approach with MBR and activated-sludge configurations. For facilities treating food-processing wastewater, the reported discharge application and biological stage can be considered alongside DAF flotation systems where solids or oil removal is part of the preliminary treatment requirement.
If your plant looks like a decentralised site with a flow near 150 m³/day, an irrigation, horticulture or industrial reuse destination, and an energy or tanker-transport constraint, this is what it means for you: the Rabigh installation provides a reported example of aerobic granular sludge followed by membrane filtration, but a supplier selection still requires confirmation of turndown, redundancy, effluent limits, controls and lifecycle costs. The source does not report BOD/COD feed values, treatment-class ranges, capital cost, lead time or a full treatment train. TechRound
FAQ
What flow rate can NuRain’s full-scale wastewater unit treat?
KAUST reported that the full-scale unit installed at the National Water Company’s wastewater treatment plant in Rabigh treats 150 m³ per day, producing enough treated water for around 1,000 to 2,000 people. TechRound The source did not report design variability, maximum capacity or operating availability.
What treatment technology does the NuRain system use?
The system combines aerobic granular sludge with gravity-driven membrane filtration and is designed to produce water for non-drinking uses including irrigation, horticulture and industry. TechRound Screening, primary clarification, tertiary treatment and disinfection were not specified in the source.
How much lower could the system’s energy demand be?
The developers said the technology could reduce energy demand by around 50% compared with conventional treatment processes. TechRound No electricity consumption, operating cost or payback period was reported, so those inputs would need to be obtained from suppliers during scoping.
What should a buyer confirm before selecting a decentralised treatment supplier?
Buyers should confirm the required flow range, effluent limits, reuse destination, redundancy, controls, installation time and lifecycle cost. The source establishes a 150 m³/day Rabigh installation and an intended treatment train, but it does not provide capital cost, lead time, BOD/COD feed values or a complete list of plant stages. TechRound