In a report published 17 November 2026, the Supreme Court stressed that cleaning the Yamuna requires coordinated pollution controls, sewage interception and treatment, and stronger plant monitoring—not only additional treatment infrastructure. The court considered a draft plan addressing 9,666.81 MLD of wastewater discharged through 520 drains into the Yamuna and its tributaries.AP7AM
Key takeaways
- The draft Yamuna Action Plan envisages 125 new sewage treatment plants, 12 common effluent treatment plants, 10 municipal solid waste processing plants and 23 biogas plants, together with upgrades to existing facilities across the river basin.AP7AM
- The plan seeks to intercept, divert and treat 520 drains carrying approximately 9,666.81 MLD of wastewater into the Yamuna and its tributaries.AP7AM
- Existing STPs and CETPs have been directed to install tamper-proof energy meters and inlet and outlet meters with continuous-monitoring sensors for treated volume and discharge quality.AP7AM
- Senior officials from Yamuna basin states and union territories will serve as nodal officers for coordination with the Central Pollution Control Board and compliance with the court’s directions.AP7AM
What happened
A Bench of Justices Manoj Misra and Manmohan reviewed the draft Yamuna Action Plan prepared by a committee headed by the Union Home Secretary and said the river must be managed as one shared resource. The court observed that uncoordinated action among states had contributed to continued deterioration despite substantial expenditure on cleaning the river.AP7AM
“This Court is of the view that industrial pollution and untreated sewage must be curtailed, if not stopped altogether, at the source. Where that is not possible, the sewage must first be tapped and then treated,” the court said.AP7AM
The draft plan combines new treatment capacity with facility upgrades and a drain-interception programme. It also identifies 520 drains that currently discharge approximately 9,666.81 MLD of wastewater into the Yamuna and its tributaries.AP7AM
The court also directed existing STPs and CETPs to install tamper-proof smart energy meters plus inlet and outlet meters with continuous-monitoring sensors. Meter readings covering treated volume and discharge quality are to be uploaded live to the Central Pollution Control Board and relevant state pollution control boards, while real-time water-quality stations are to be installed along the river and major drains.AP7AM
Coordination is to be handled through senior officers from Yamuna basin states and union territories and concerned central ministries. Municipal authorities must also register septage tankers and install GPS tracking for the collection and disposal of household sewage. The case is scheduled for further hearing on 13 January 2027.AP7AM
Specification read
The reported wastewater load is approximately 9,666.81 MLD, equivalent to 9,666,810 m³/day. A population-equivalent figure was not reported, so it should not be inferred without a stated conversion basis.AP7AM
For a municipal sewage project of this type, the treatment train would typically be evaluated as screening and pumping, primary clarification, biological treatment such as A2O, MBBR, SBR, UASB or MBR, followed by tertiary treatment and disinfection where discharge requirements require it. The event bears directly on collection, interception, biological treatment capacity, discharge monitoring and upstream pollution control. The source does not specify which treatment processes will be used at each facility, nor does it provide inlet and outlet BOD or COD values, so equipment selection cannot be narrowed from the reported information alone.
For buyers, the practical implication is that instrumented treatment, not nominal capacity alone, is central to the specification: metering, continuous discharge monitoring and live reporting are required at existing STPs and CETPs. That makes flow instrumentation, controls and data integration relevant to municipal wastewater projects and integrated sewage treatment scopes. The source also does not report plant-level capacities, performance guarantees or construction schedules, so those remain open procurement inputs rather than published figures.
FAQ
What treatment capacity is required for the Yamuna drain-interception programme?
The draft plan seeks to intercept, divert and treat 520 drains carrying approximately 9,666.81 MLD, but the source does not allocate that flow among individual facilities or report plant-by-plant capacities.AP7AM Operators will therefore need confirmed flows, catchment boundaries and treatment-stage allocations before sizing equipment.
What monitoring equipment must existing STPs and CETPs provide?
Existing facilities must install tamper-proof smart energy meters and inlet and outlet meters with continuous-monitoring sensors for treated volume and discharge quality. Readings must be uploaded live to the Central Pollution Control Board and relevant state pollution control boards.AP7AM Procurement specifications should therefore define metering accuracy, sensor outputs, telemetry and data interfaces.
How should a supplier be selected for a monitored wastewater plant?
The reported requirements point to a combined assessment of treatment performance, metering, continuous discharge monitoring and live data reporting; however, the source does not prescribe tender criteria, supplier qualifications or award methods. Buyers should request proposed instrument accuracy, integration capability, maintenance support and verification against the stated reporting obligations before shortlisting suppliers.
What inputs are still needed to specify treatment equipment?
The source does not report plant-level design flows, inlet and outlet BOD or COD, treatment-process selections, hydraulic profiles, construction schedules or costs. Those inputs must be established for each project before comparing biological capacity, tertiary treatment, disinfection or solids-handling equipment. The 9,666.81 MLD figure is a basin-wide reported wastewater load, not an allocation to any unnamed plant.AP7AM